Conference Presentation Onplacedonhold; Conference Presentation Relayquality; Conference Videobandwidth Mainchannel Weight; Conference Videobandwidth Mode - Cisco TelePresence MX200 G2 Administrator's Manual

Cisco TelePresence MX200 G2 and MX300 G2

Introduction

Conference Presentation RelayQuality

This configuration applies to video systems that are using the built-in MultiSite feature
(optional) to host a multipoint video conference. When a remote user shares a presentation,
the video system (codec) will transcode the presentation and send it to the other
participants in the multipoint conference. The RelayQuality setting specifies whether to give
priority to high frame rate or to high resolution for the presentation source.
Requires user role: ADMIN
Default value: Off
Value space: Motion/Sharpness
Motion: Gives the highest possible frame rate. Used when there is a need for higher
frame rates, typically when there is a lot of motion in the picture.
Sharpness: Gives the highest possible resolution. Used when you want the highest
quality of detailed images and graphics.

Conference Presentation OnPlacedOnHold

Define whether or not to continue sharing a presentation after the remote site has put you
on hold.
Requires user role: ADMIN
Default value: NoAction
Value space: Stop/NoAction
Stop: The video system stops the presentation sharing when the remote site puts you on
hold. The presentation will not continue when the call is resumed.
NoAction: The video system will not stop the presentation sharing when put on hold. The
presentation will not be shared while you are on hold, but it will continue automatically
when the call is resumed.
D15332.01 MX200 G2 and MX300 G2 Administrator Guide CE8.0, NOVEMBER 2015.
Configuration Peripherals Maintenance

Conference VideoBandwidth Mode

Define the conference video bandwidth mode.
Requires user role: ADMIN
Default value: Dynamic
Value space: Dynamic/Static
Dynamic: The available transmit bandwidth for the video channels are distributed among
the currently active channels. If there is no presentation, the main video channels will
use the bandwidth of the presentation channel.
Static: The available transmit bandwidth is assigned to each video channel, even if it is
not active.

Conference VideoBandwidth MainChannel Weight

The available transmit video bandwidth is distributed on the main channel and presentation
channel according to "MainChannel Weight" and "PresentationChannel Weight". If the main
channel weight is 2 and the presentation channel weight is 1, then the main channel will use
twice as much bandwidth as the presentation channel.
Requires user role: ADMIN
Default value: 5
Value space: Integer (1..10)
Set the bandwidth weight for the main channel.

Conference VideoBandwidth PresentationChannel Weight

The available transmit video bandwidth is distributed on the main channel and presentation
channel according to "MainChannel Weight" and "PresentationChannel Weight". If the main
channel weight is 2 and the presentation channel weight is 1, then the main channel will use
twice as much bandwidth as the presentation channel.
Requires user role: ADMIN
Default value: 5
Value space: Integer (1..10)
Set the bandwidth weight for the presentation channel.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
73
Administrator Guide
System settings System settings Appendices