8: Kvm Settings; User Console - Lantronix SecureLinx Spider User Manual

8: KVM Settings

User Console

The Remote Console window into the target system has settings that may be changed for
the way each individual user interacts with the Spider. When a user is created by copying
from an existing user, the Remote Console settings will be copied as well. These settings
may be changed on the page KVM Settings
the Spider View application, these settings do not apply; see the Spider View User Guide
for further information.
The way in which the Spider transmits video data back to the client system can be
tailored for the type of network connection. On a LAN where bandwidth is not an issue,
compression is not required and the speed of updates can be maximized. For other
connections, the optimum user interaction needs to trade off image quality and update
speed to fit the size of the pipe. Because various users may be accessing the Spider over
different connections, these parameters are applied on a user-by-user basis. The default
is set for maximum image quality and speed of updates, which results in high data rate
and hence is suitable for LANs where bursts of up to 2 Mbytes/second are acceptable.
To modify the user console:
1. Select KVM Settings User Console from the Main Menu. The Remote Console
Settings for User window displays.
2. Configure the following settings:
SecureLinx Spider User Guide
User Console. Note that if you are using
35