Virtual Media Options - Lantronix SecureLinx Spider User Manual

6: Virtual Media

Virtual Media Options

The operating system on the target computer must have a USB mass storage driver
installed in order to use Virtual Media. As the BIOS on some systems does not always
support mass storage emulation on the USB interface, the system default is to disable
USB mass storage unless an image is loaded. This option may be unselected to use
virtual media options. Only one active virtual media image is available at a time.
To configure virtual media options:
1. From the Main Menu, select Virtual Media Options to open the Virtual Media
Options window.
2. Select or deselect Disable USB Mass Storage if no image is loaded.
3. Click Apply to save settings. Click Reset to Def to restore the system default.
SecureLinx Spider User Guide 31