Snmp - Lantronix SecureLinx Spider User Manual

2. Modify the following fields:
Event Log Targets
List logging enabled
NFS Logging enabled
SMTP Logging
enabled
SNMP Logging
enabled
Event Log Assignments
Event Log
Assignments
3. Click Apply to save settings. Click Reset to Def to restore system defaults.

SNMP

The Spider has an internal SNMP agent which has various objects accessible in its MIB.
It also can generate traps based on events. The Spider permits enabling or disabling the
SecureLinx Spider User Guide
Check this box to use the internal log list of the Spider. The
maximum number of entries is 1,000. Every entry that exceeds
this limit overrides the oldest one. The number of log entries
shown on each page may be changed in the text box. The
internal log list is cleared when power is removed from the
Spider, or when the Clear button is clicked.
The Spider can write log information to a file on an NFS server.
Provide the name of the server, share, and file in the boxes. The
NFS share will be mounted immediately, and an error message
will result if it cannot be found.
With this option the Spider is able to send emails to an address
given by the email address text field in the Event Log Settings.
These emails contain the same description strings as the internal
log file and the mail subject contains the event class. In order to
use this log destination, specify an SMTP Server, the Receiving
Email Address, and Sender Email Address. Enter the mail
server and SMTP port as <serverip>:<port>.
If selected, the Spider sends an SNMP trap to a specified
destination IP address every time a log event occurs. Configure
the Destination IP and Community. View the SNMPMIB
implemented in the Spider by clicking on the SLS SNMP MIB
link.
Select the event classes for monitoring, local logging, and
exportation.
9: Device Settings
49