Lantronix SecureLinx Spider User Manual page 42

To modify security settings:
1. Select Device Settings Security from the Main Menu. The Security window
displays.
2. Modify the following fields:
HTTP Encryption
Force HTTPS for
Web Access
KVM Encryption
KVM Encryption
Group Based Access Control
Enable Group
Based System
Access
Default Action
SecureLinx Spider User Guide
Typically, the Spider listens on both HTTP and HTTPS ports for
incoming connections. If this box is checked, access can only be
made using SSL, and connection requests on the HTTP port will be
ignored. See the section on Certificate for further information on
how the Spider identifies itself using a cryptographic certificate.
In addition to the SSL encryption of the Spider's web pages, the
keyboard, mouse, and video data may be encrypted. Select Off to
use no encryption.
Select Try for the Spider to attempt to make an encrypted
connection but will back off to unencrypted if one cannot be
established.
Select Force for an encrypted connection to be made or an error
will be reported.
When this box is checked, the rules for IP based access are
enforced. They are ignored when the box is not checked.
If after evaluation of all rules a request for connection from a given
IP address has not had either an Accept or Drop decision made,
this selection can allow it to be either Accepted or Dropped. In other
words, this pull-down defines the default action for IP addresses
with no rules defined.
9: Device Settings
42