Telnet Console Use - Lantronix SecureLinx Spider User Manual

Telnet Console Use

When using the Telnet Console, the Spider opens a window on the client system that
provides direct access to the Telnet/SSH command line. This eliminates the need to have
a Telnet or SSH utility running on the client system.
1. From the Main Menu, select Remote Control
have permissions set to use Telnet or SSH. The JRE will launch, and the Telnet
Console window appears. Telnet Console and Remote KVM Console windows may
be open concurrently.
2. The Spider will present a LOGIN: and PASSWORD prompts. Enter a valid user name
and password.
3. The Spider will reply with a Welcome and status, followed by a command line prompt.
From the command line selections are:
Help – displays a list of commands
Version – displays the current Spider firmware version number
Terminal – enter passthrough to serial port mode
Logout – terminates the Telnet or SSH connection
4. Enter terminal or t to open the connection to the serial port.
5. Send and receive serial data between the Telnet Console window and the serial port.
When in terminal mode, the Spider does not echo any characters typed back to the
Telnet Console window, it simply passes them through to the serial port. Characters
coming in from the serial port are displayed in the window.
6. When through, enter Esc-Exit to return to the command line.
7. Enter logout or l to close the connection.
SecureLinx Spider User Guide
5: Remote System Control
Telnet Console. The user must
28