Cd-Rom Image - Lantronix SecureLinx Spider User Manual

2. Click Browse to locate the floppy image file.
3. Click Upload to load the image into Spider's memory. This floppy drive is accessible
to the remote computer as a letter-name floppy drive (e.g. B:).
4. To remove the current image file, click Discard.

CD-ROM Image

The Virtual Media-CD-ROM Image option allows the Spider to access a CD-ROM image
up to 800MB on a Windows shared folder via SAMBA. The Spider then makes that image
accessible to the target computer by emulating a USB disk drive.
Appropriate administrative permissions to access the host and file are needed, as well as
the ability to see that computer over the network from the Spider.
The connection remains mounted until the current user logs out or the Spider is rebooted.
Other client systems logging into the Spider will see the active image in all Virtual Media
pages.
To access a CD-ROM image:
1. From the Main Menu, select Virtual Media
Windows Share page.
2. Enter the Share host name, Share name, and Path to image
3. If the file is protected, enter the User name and Password.
4. Click Set to mount the image. (The file must be structured as a CD-ROM image.)The
filename appears as the Active Image and the image is available to the target
computer as a letter drive (e.g. F:).
5. Click Discard to terminate the connection to the share drive.
SecureLinx Spider User Guide
CD-ROM Image to open the Image on
6: Virtual Media
30