Configuring Chassis Slot, Iom, And Mda Parameters - Alcatel-Lucent 7450 ESS-7 Installation Manual

Configuring Chassis Slot, IOM, and MDA Parameters

Configuring Chassis Slot, IOM, and MDA Parameters
After the SF/CPM is installed, chassis slots, IOMs, and MDAs can be preconfigured prior to the
component installation or configured after the components are installed. Each specific slot must
specify an IOM, MDA slot, and MDA type. Ports cannot be configured until the MDA is
configured.
Preprovision components in the following order:
Configuring Chassis Slot and IOM Parameters
In the
provision the chassis slot and IOM:
Step 1
Step 2
Step 3
Page 96
1. Chassis slot number
2. Card type
3. MDA slot number
4. MDA type
5. Ports
context, use the following CLI commands and syntax examples to
config>card
Command
card slot-number
card-type card-type
no shutdown
Example
card 1
card-type iom-20g
no shutdown
7450 ESS-7