Lc - Line Format; Pc - Bitmap Font Format - InfoPrint 6700 Series Programmer's Reference Manual

Chapter 2
LC – Line Format
Using this command, lines or squares can be drawn in the drawing space.
Coordinates are specified in 1/10 mm units. Squares can have rounded
corners. If the radius is set higher than the square width and height, circles
can be drawn.
PC – Bitmap Font Format
This command formats bitmap font fields. The location coordinates are
specified in 1/10 mm units. The font type can be set to any of the types listed
in Table 1. Attributes like expansion and reverse can be applied. Data to be
printed can be included in this command or supplied separately through the
RC command.
Parameter
14
Font
A Times Roman
B Times Roman
C Times Roman
D Times Roman
E Times Roman
F Times Roman
G Helvetica
H Helvetica
I Helvetica
J Helvetica
K Helvetica
L Helvetica
M Presentation
N Letter Gothic
O Prestige Elite
P Prestige Elite
Q Courier
R Courier
S OCR-A
T OCR-B
Table 1.
Attributes
medium 8 point
medium 10 point
bold 10 point
bold 12 point
bold 14 point
italic 12 point
medium 6 point
medium 10 point
medium 12 point
bold 12 point
bold 14 point
italic 12 point
bold 18 point
medium 9.5 point
medium 7 point
medium 10 point
medium 10 point
bold 12 point
12 point
12 point
Size