Electrical Connections; Technical Features - BORETTI BPO-90 Operating Instructions Manual

Electrical connections

Before connecting the oven to the mains power supply,
make sure that:
- The supply voltage corresponds to the specifications
on the data plate on the front of the oven.
- The mains supply has an efficient earth (ground)
GB
connection complying with all applicable laws and
regulations. Correct earthing (grounding) is a legal
requirement.
The power cable should never reach a temperature 50°
C above ambient temperature at any point along its
length.
If a fixed appliance is not provided with a power cable
and plug, or some other device permitting it to be
disconnected from the mains electricity supply, with a
gap between the contacts big enough to guarantee
class III overvoltage protection, then such a device must
be fitted to the power supply in compliance with the
regulations governing electrical installations.
The socket or switch must be easily reachable with the
oven fully installed.
N.B. The manufacturer declines all responsibility for
damage or injury if the above instructionsntinfortunistiche
non vengano rispettate.
MUFFLE SIZE
Roof element, external
Roof element, internal
Circular element
Bottom element

TECHNICAL FEATURES

Length (mm)
Height (mm)
Depth (mm)
HEATING ELEMENT POWER RATING
1100 W
1750 W
2300 W
1300 W
34
CABLE TYPES AND MINIMAL DIAMETERS
H05RR-F 3x1,5 mm
2
H05VV-F 3x1,5 mm
2
H05RN-F 3x1,5 mm
2
H05V2V2-F 3x1,5 mm
607 CAVITY VOLUME
335 (conventional/fan
390 assisted)
SASO
H05RR-F 3x2,5 mm
H05VV-F 3x2,5 mm
H05RN-F 3x2,5 mm
H05V2V2-F 3x2,5 mm
2
75 litres
2
2
2
2