Electrical Connections - BORETTI FI 601 MARMO Installation - Use - Maintenance

Electrical connections

Before connecting the oven to the mains power supply, make sure that:
* The supply voltage corresponds to the specifications on the data
plate on the front of the oven;
* The mains supply has an efficient earth (ground) connection
complying with all applicable laws and regulations. Correct earthing
(grounding) is a legal requirement.
The power cable should never reach a temperature 50° C above ambient
temperature at any point along its length. If a fixed appliance is not
provided with a power cable and plug, or some other device permitting
it to be disconnected from the mains electricity supply, with a gap
between the contacts big enough to guarantee class III overvoltage
protection, then such a device must be fitted to the power supply in
compliance with the regulations governing electrical installations. The
omnipolar plug or switch must be easy to reach when the appliance is
installed. The unit becomes very hot during use. Be careful not to touch
the heating elements inside the oven. If the oven came with a meat
probe, use only the probe recommended for this oven.
Cable types and minimal diameters
H05RR-F 3x1,5mm
H05VV-F 3x1,5mm
H05RN-F 3x1,5mm
H05V2V2-F 3x1,5mm
H05RR-F
2
H05VV-F
2
H05RN-F
2
H05V2V2-F
2
59
SASO
3x2,5mm
2
3x2,5mm
2
3x2,5mm
2
3x2,5mm
2