Status List; Malfunction List - Mitsubishi Electric AE-200A Instruction Book

3-4. Status List

3-4-1. Malfunction List

3-4-1-1. LCD
Touch [Status List] in the menu bar, and then touch [Malfunction].
A list of units that are currently malfunctioning will appear.
Note: The [Controller] setting will appear (only on the AE-200's LCD) when the [System Exp] setting on the [Unit Info.] screen is set
to [Expand]. Switch the [Controller] setting between [AE200] and [Exp1] through [Exp4] to display the list for each AE-200,
AE-50, and EW-50 individually.
Note: When an error occurs, check the address of the unit in error, error code and its definition, and then contact your dealer.
Controller
Select [AE] to display the list
for AE-200, and select [1],
[2], [3], or [4] to display the
list for each AE-50/EW-50.
Floor name or block name
Group name
Unit address
Item
Floor name or block name
Group name
Unit address
Number of units in error
Error code
All Reset
WT07982X03
The name of the floor or the block that the unit in error belongs to will appear.
Note: This area will be blank if the unit in error is a unit such as an outdoor unit or a system
controller.
Note: This area will be blank if the unit in error is a unit that does not belong to any block or
floor.
The name of the group that the unit in error belongs to will appear.
Note: This area will be blank if the unit in error is a unit such as an outdoor unit or a system
controller.
The address of the unit in error will appear.
Note: When [1], [2], [3], or [4] is selected as [Controller], AE-50/EW-50 No. and unit address
will appear. (When the AE-50/EW-50 No. is 1 and the unit address is 012, "1-012" will
appear.)
The number of malfunctioning units will appear.
The error code that corresponds to the error will appear.
Touch the error code to display the definition.
Touch to reset all errors at once.
Note: The units whose error has been reset will stop.
Note: When the errors are reset, the units that are not in error may stop. Refer to the
Instruction Book (Detailed operations) for details.
44
Description
Number of units in error
Number of units whose
filter sign is turned on
Error code
All Reset
Touch to reset all errors at
once.