Mitsubishi Electric AE-200A Instruction Book page 74

The display range of the area on the [Floor Layout] screen vary, depending on the selected floor layout.
Floor layout
(3) Touch the "Floor level name" button to display the
keyboard. Enter the floor level name in 3 alphanumeric
or symbol characters or less.
Then, touch the "Floor name" button to display the
keyboard. Enter the floor name in 20 alphanumeric or
symbol characters or less.
(4) To read floor plan files from the USB memory, touch
[Read from USB Memory]. Refer to [2] below for the
restrictions on the floor plan files to be read.
[2] Restrictions on the floor plan files to be read
900 (height) × 1890 (width) dots for each floor plan
File size
gif
File format
File name
*1 The floor numbers in the table are not the actual floor level name, but the number counted from the bottom on the [Floor
File location In the root folder of the USB memory
WT07982X03
Display area Floor layout
Note: The file size must be 900 (height) × 1890 (width) dots regardless of the display range of the area. (Even
when the floor layout shows only one display area, the file size must be 900 (height) × 1890 (width)
dots. In this case, create a file plan only in the left top area.)
Note: Files that contain extension data (metadata such as XMP, transparent GIF, interlace GIF, animated GIF)
cannot be read.
Floor *1 File name
1 floor_01.gif
2 floor_02.gif
3 floor_03.gif
4 floor_04.gif
5 floor_05.gif
Layout] screen. Even if the floor level name is set to "15F," the file name will be "floor_01.gif" when the floor is the first
floor in the setting.
Display area
630 dots
450 dots
1890 dots
Floor *1 File name
6 floor_06.gif
7 floor_07.gif
8 floor_08.gif
9 floor_09.gif
10 floor_10.gif
74
Floor level name
Floor name
900 dots