Mitsubishi Electric AE-200A Instruction Book page 12

[2] Floor Layout display
Click [Monitor/Operation] in the menu, and then click [Floor Layout] or "Floor display area" to display the operation
status of unit groups on the floor layout. The floor layout to be displayed can be changed by clicking "Floor display
area" and "Displayed floor switching area" while the floor layout is displayed.
Note: If you click "Floor display area" in the Home screen, the menu changes to [Monitor/Operation] and the floor layout of the
clicked floor is displayed.
Note: If a floor layout is not registered, a floor layout will not be displayed.
Floor name
Number of units
currently in error
Displayed floor
switching area
Floor display area
Item
Displayed floor
switching area
Floor display area
Number of units
currently in error
Floor name
Upper floor
Lower floor
Select all
Deselect all
Close
Zoom bar
WT07982X03
Switches the floors displayed in the floor display area in units of 10 floors.
It simply displays the status of the air conditioning units registered to the floors.
(Green): One or more units on the floor are in operation.
(Gray): All units on the floor are stopped.
(Red): One or more units on the floor are in error.
Note: The number of buttons for switching displayed floors that are shown differs depending on the
settings configured in "Floor settings" of Initial Setting Tool.
Displays the operation status of the air conditioning units for 10 floors.
It simply displays the status of the air conditioning units registered to the floors.
Green
: One or more units on the floor are in operation.
Gray
: All units on the floor are stopped.
: One or more units on the floor are in error.
Red
The number of units that are under the control of AE-200/AE-50/EW-50 and currently in error
will appear. Clicking [Notice] > [Error List] will bring up the Error List screen. (See section 3-4-1
"Malfunction List".)
The name of the floor shown is displayed.
Click to move to the upper floor.
Click to move to the lower floor.
Click to select all unit groups that are displayed.
Click to cancel all selections at once.
Click to close the Floor Layout screen.
Click to zoom in/out the floor layout.
Upper floor
Floor Layout
Lower floor
Description
12
Deselect all
Close
Select all
Zoom bar