Mitsubishi Electric AE-200A Instruction Book page 65

(2) In the [Room temperature] section, select the desired temperature display option to be used on the [Floor] or
[Block] display.
Select [Always show] to display the temperature at all times, [Show during operation] to display the
temperature only during operation, and [Hide] not to display the temperature.
Note: This setting is effective only on the LCD and will not be reflected to the Web browser.
Note: Selecting [Show during operation] is recommended because the temperature shown may be higher than the actual
temperature especially when the unit is stopped during the Heat mode.
(3) In the [Humidity] section, make the Show/Hide setting for the humidity reading of the built-in humidity sensor
on the ME remote controller (North America: PAR-U01MEDU, Europe: PAR-U02MEDA).
Select [ON] to display the humidity reading on the [Floor] or [Block] display.
WT07982X03
65