Mitsubishi Electric AE-200A Instruction Book page 14

(3) Selecting all groups on all floors
On the [Floor] or [Block] display, touch the "Select-all-
groups" button. All floor and group icons will appear with
an orange frame.
To cancel all group selections, touch the "Deselect-all"
button.
(4) Selecting all groups in the selected block
On the [Block] display, touch the block(s) you want to
operate. The selected block and group icons will appear
with an orange frame.
Touch again to deselect.
To cancel all group selections, touch the "Deselect-all"
button.
[2] Selecting equipment type
(1) When the equipment types of all selected groups are the same
Selecting the group icons and touching [Operate] will bring up the operation settings screen for the selected
groups.
Refer to section 3-1-5 "Operation settings screen" for details about the operation settings.
(2) When the equipment types of the selected groups are different
Selecting the group icons and touching [Operate] will bring up the
equipment type selection screen.
Touch the equipment type(s) you want to operate, and then touch [OK]
to bring up the operation settings screen for the selected equipment
groups.
Refer to section 3-1-5 "Operation settings screen" for details about
the operation settings.
Note: When two or more equipment types are selected, only the [ON/OFF],
[Schedule], and [Hold] settings will appear on the operation settings
screen.
WT07982X03
Block icon
Deselect-all
14
Select-all-groups
Deselect-all