Unit Information - Mitsubishi Electric AE-200A Instruction Book

5-2-5. Unit Information

Touch [Initial Settings] in the menu bar, and then touch [Unit Info.] or [Unit Info. 2].
Make necessary basic system settings such as unit settings, display format, sound/brightness settings, use or non-
use of test run, and display or non-display of room temperature/humidity, and then touch [Save Settings].
Note: The Unit Information settings may not be accessible if logged in as a building manager.
Unit Info.
Unit Information
Set the unit name and unit
ID.
Sound and brightness
Set the sound and
brightness levels.
Unit Info. 2
Air-conditioner Settings
Set the test run setting
and display option of room
temperature/humidity.
[1] Unit Information
Follow the instructions below to set the unit name, unit ID, and System Expansion setting.
(1) Touch the [Name] button to display the keyboard. Enter the unit name in 40 alphanumeric or symbol characters
or less. The name entered here will be used on the screen of the software that controls multiple AE-200 units
and will also be used as a sender name in the error notification e-mail and e-mail alarm.
Note: The following characters cannot be used: <, >, &, ", or '
WT07982X03
62
Display Format
Set the screen display items.
Save Settings
Touch to save the changes
made.
Save Settings
Touch to save the changes
made.