Rxgoose Boolean Inputs; Rxgoose Dps Inputs; Teleprotection Inputs; Contact Outputs - GE C30 Instruction Manual

STATUS

6.3.3 RxGOOSE boolean inputs

ACTUAL VALUES  STATUS  RxGOOSE BOOLEANS
 RxGOOSE BOOLEANS

The C30 is provided with optional IEC 61850 capability. This feature is specified as a software option at the time
of ordering. See the Order Codes section of chapter 2 for details.

6.3.4 RxGOOSE DPS inputs

ACTUAL VALUES  STATUS  RxGOOSE DPS
 RxGOOSE DPS

The C30 is provided with optional IEC 61850 capability. This feature is specified as a software option at the time
of ordering. See the Order Codes section of chapter 2 for details.

6.3.5 Teleprotection inputs

6
ACTUAL VALUES  STATUS  TELEPROTECTION INPUTS
 TELEPROTECTION
 INPUTS
The present state of teleprotection inputs from communication channels 1 and 2 are shown here. The state displayed is
that of corresponding remote output unless the channel is declared failed.

6.3.6 Contact outputs

ACTUAL VALUES  STATUS  CONTACT OUTPUTS
 CONTACT OUTPUTS

6-4
RxGOOSE BOOLEAN 1

STATUS: Off

RxGOOSE BOOLEAN 256

STATUS: Off
RxGOOSE DPS 1

Status: Intermediate

RxGOOSE DPS 16

Status: Intermediate
TELEPROTECTION

INPUT 1-1: Off

TELEPROTECTION

INPUT 1-16: Off
TELEPROTECTION

INPUT 2-1: Off

TELEPROTECTION

INPUT 2-16: Off
Cont Op 1

Off

CHAPTER 6: ACTUAL VALUES
Range: On, Off
Range: On, Off
Range: On, Off, Intermediate, Bad
Range: On, Off, Intermediate, Bad
Range: On, Off
Range: On, Off
Range: On, Off
Range: On, Off
Range: On, Off, VOff, VOn, IOn, IOff
C30 CONTROLLER SYSTEM – INSTRUCTION MANUAL