GE C30 Instruction Manual page 236
Controller system
Hide thumbs
Also See for C30:
- Instruction manual (488 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (464 pages)
Table of Contents
Advertisement
PRODUCT SETUP
File transfer by IEC 61850
The C30 supports file transfer by IEC 61850. The approach is as follows, using the SISCO AX-S4 61850 client software as an
example.
1.
In the AX-S4 61850 Explorer window, click the Tools menu and access the SISCO File Transfer Utility.
2.
Select the Remote AR Name from the drop-down list. Available files appear in the File Specification area on the right
side of the window.
3.
With the Copy option active, select a file to transfer and click the Go button. The file is copied and displays in the Local
list on the left side of the window.
4.
Repeat the process to transfer any other files.
5
5.3.4.13 Web server HTTP protocol
SETTINGS PRODUCT SETUP COMMUNICATIONS WEB SERVER HTTP PROTOCOL
WEB SERVER
HTTP PROTOCOL
The C30 contains an embedded web server and can display pages in a web browser. The web pages are organized as a
series of menus that can be accessed starting at the C30 "Main Menu." Web pages are read-only and are available
showing DNP and IEC 60870-5-104 points lists, Modbus registers, event records, fault reports, and so on. First connect the
C30 and a computer to an Ethernet network, then enter the IP address of the C30 Ethernet port in a web browser.
To close the port, set the port number to 0. The change takes effect when the C30 is restarted.
5-80
Figure 5-37: File transfer by IEC 61850
HTTP TCP PORT
NUMBER(80): 80
CHAPTER 5: SETTINGS
Range: 0 to 65535 in steps of 1
C30 CONTROLLER SYSTEM – INSTRUCTION MANUAL
Advertisement
Table of Contents
