CHAPTER 5: SETTINGS
Select the user access rights by enabling the check box of one or more fields.
The table outlines access rights.
Table 5-1: Access rights summary
Deletes the user account when exiting the user management window
Allows the user to read Actual Values
Allows the user to read Settings values
Allows the user to execute Commands
Allows the user to use the Event Recorder
Allows the user to read FlexLogic values
Allows the user to write to any function to which they have read privileges. When any of the Settings, Event
Recorder, and FlexLogic check boxes are enabled by themselves, the user is granted read access. When
any of them are enabled in conjunction with the Update Info box, they are granted read and write access.
The user is not granted write access to functions that are not enabled, even if the Update Info field is
When the check box is enabled, the user becomes an EnerVista UR Setup administrator and has all
administrative rights. Exercise caution when granting administrator rights.
Click OK to add the user account to the system.
Modify user privileges
The following pre-requisites are required to modify user privileges in the EnerVista security management system:
The user modifying the privileges must have administrator rights
The EnerVista security management system must be enabled (the Enable Security check box enabled)
To modify user privileges:
Select the Security > User Management item from the top menu to open the user management window.
Locate the username in the User field.
C30 CONTROLLER SYSTEM – INSTRUCTION MANUAL