You can also configure the [Quick Action] key to save setups, screen images,
or data. See
To save setup files
Setup files can be saved to one of 10 internal (\Agilent Flash) locations or
to an external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select
2 Press the softkey in the second position and use the Entry knob to
3 Finally, press the Press to Save softkey.
Setup files have the extension SCP. These extensions appear when using
the File Explorer (see
appear when using the Recall Menu.
To save BMP or PNG image files
Image files can be saved to an external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select
2 Press the softkey in the second position and use the Entry knob to
3 Press the Settings softkey.
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
"Configuring the [Quick Action] Key"
Setup (*.scp).
navigate to the save location. See
page 234.
A message indicating whether the save was successful is displayed.
8-bit Bitmap image (*.bmp), 24-bit Bitmap image (*.bmp), or 24-bit image (*.png).
navigate to the save location. See
page 234.
In the File Settings Menu, you have these softkeys and options:
Setup Info — setup information (vertical, horizontal, trigger, acquisition,
•
math, and display settings) is also saved in a separate file with a
TXT extension.
Invert Grat — the graticule in the image file has a white background
•
instead of the black backgound that appears on- screen.
Save/Recall (Setups, Screens, Data)
"To navigate storage locations"
"File Explorer"
on page 249), but they do not
"To navigate storage locations"
on page 261.
on
on
18
229