Troubleshoot Audio And Echo Issues; Connecting A Wireless Adapter To Your Phone; Connect The Wireless Adapter - Polycom VVX201 Owner's Manual

3. Remove the EHS adapter from the serial port on the back of the phone.

Troubleshoot Audio and Echo Issues

In some cases when you are using your headset, your contacts may experience audio or echo issues,
such as feedback of your voice or of their own voice, during the call. If your contacts hear an echo
during a call when using your headset, you need to enable echo cancellation on your phone.
To enable echo cancellation on your phone:
Navigate to Settings > Basic > Preferences > Headset > Echo Cancellation.
1.
Select Enabled.
2.
Connecting a Wireless Adapter to Your
Phone
The wireless adapter allows a desk phone to be used without a cord connecting it to the Wireless
Transmitter. The range of the wireless adapter is 40 feet from the Wireless Transmitter.

Connect the Wireless Adapter

This section takes you through the steps to connect a VVX phone to a Wi-Fi adapter. The wireless adaptor
has its own power supply. Plug the phone's power cord into the short "power in" cord on the wireless
adapter and then into the wall outlet. Then,
1. Plug the included LAN cable into the Wireless Adapter.
2. Plug the other end of the LAN cable into the back of the phone using the port.
3. Plug the Wireless Adapter long power cord into an outlet
4. Connect Power to the Desk Phone
Use the included power cord and plug one end into the back of the phone and the other
end into the wall outlet. The phone will indicate that it is configuring itself. Once the
phone has finished its configuration, it is ready to make and receive phone calls.
User Guide for Polycom VVX201
54