Output Format - Extron electronics DTP CrossPoint 84 IPCP Programming Manual

Command and Response Table for Matrix Switcher Commands (continued)
Command Function
HDCP status
View input HDCP status
View HDCP status of all inputs
View output HDCP status
View HDCP status of all outputs

Output format

Set output format
View output format
Output video bit depth
Set bit depth
View bit depth
View ties and mutes
Read video output tie
Example:
Read audio output tie
Example:
View output mutes
NOTE: The " " portion of the response appears only when the switcher is in Verbose mode 2 or 3.
Mut
Input sync detection
View all input connections
NOTE: The " " portion of the response appears only when the switcher is in Verbose mode 2 or 3.
Frq00•
Example:
XTP/HDBaseT/XTP switch positions
Check input switch position
Check output switch position
NOTE: X! = Input number
X@ = Output number
X1! = HDCP status (for inputs)
X1@ = HDCP status (for outputs)
X1# = Video format
X1$ = Output video bit depth
X1% = Video mute status
X1^ = Input signal status
X1& = TP and insertion input number
X1* = Switch position
X1( = TP (scaled) and insertion output number
SIS Command Response
(Host to Unit) (Unit to Host)
E X! } X1!]
I HDCP
E } X1!
IHDCP
E X@ } X1@]
O HDCP
E } X1@
OHDCP
EX@ X1# }
* VTPO Vtpo
EX@ } X1#]
VTPO
EX@ X1$ }
* BITD Bitd
EX@ } X1$]
BITD
X@ X!]
%
7%
02
X@ X!]
$
3$
06
E }
VM Mut
0LS
Frq00•
0LS
Response Status:
E X1& } X1*]
I HDBT
HdbtI
E X1( } X1*]
O HDBT
HdbtO
–
01 08
–
01 04
0 = No source device connected
= Source connected is HDCP-compliant
1
= No monitor connected
0
1 = Monitor connected, does not support HDCP
= Monitor connected, supports HDCP, ,the video signal is not encrypted
2
3 = Monitor connected, supports HDCP, the video signal is encrypted
= Auto (HDMI RGB Full to CEA sink or DVI to non-CEA sink)
0
= DVI (RGB 444, no audio, no InfoFrames)
1
= HDMI RGB Full (RGB 444, 000 - 255 audio, InfoFrames)
2
= HDMI RGB Limited (RGB 444, 016 - 255 audio, InfoFrames)
3
4 = HDMI YUV Full (RGB 444, 000 - 255 audio, InfoFrames)
= HDMI YUV Limited (RGB 444, 016 - 255 audio, InfoFrames)
5
6 = HDMI YUV Full (RGB 422, 000 - 255 audio, InfoFrames)
= HDMI YUV Limited (RGB 422, 016 - 255 audio, InfoFrames)
7
= Auto (default)
0
= No mutes
0
0 = No signal detected
or
07 08
= DTP
0
or
03 04
DTP Crosspoint 84 IPCP Series Matrix Switchers • Programming Guide
Additional description
X1! X1! X1! ]
...
1 2 3 8
X1@ X1@ X1@ ]
1 2 3 4
X@ X1#]
*
X@ X1$]
*
Video input
] Input 2 video is tied to output 7.
Audio input
] Input 6 audio is tied to output 3.
X1% X1% X1% X1% ] X1%
Each
1 2 3 4
left = output 1, right = output 4).
X1^ X1^ X1^ ] X1^
Each
...
1 2 8
input, starting from input 1.
Sync detected
No input detected
0 0 0 1 1 1 0 1
Input: 1 2 3 4 5 6 7 8
Verbose mode 0 and 1.
X1& X1*] Verbose mode 2 and 3.
*
Verbose mode 0 and 1.
X1( X1*] Verbose mode 2 and 3.
*
2 = Source connected is not HDCP-compliant
= 8-bit
1
= Video mute
1
1 = Sync detected
= HDBT (output only)
1
X! X@
is tied to output .
X! X@
is tied to output .
is the mute status of an output:
is the connection status of an
= Video and sync
2
= XTP
2
12