Extron electronics DTP CrossPoint 84 IPCP Programming Manual page 30

Command and Response Table for DSP SIS Commands (continued)
Command Function
Group masters
NOTES:
•
A group must have assigned members for these commands to have an effect.
•
X6!
For , a positive (+) value is assumed unless a negative (-) value is specified.
•
X6!
If entering a value outside the valid range for the group or outside the soft limits, the DTP CrossPoint responds with an invalid
parameter ( E13 ) error.
Set a group fader control
Example:
Raise a group fader control
Example:
Lower a group fader control
View the group fader control level
Mute a group mute control
Clear (unmute) a group mute control
View a group mute control
Set soft limits
Example:
View soft limits
View group type
View group members
SIS Command Response
(Host to Unit) (Unit to Host)
E X6# X6! }
D * GRPM GrpmD
E }
D2*-293*GRPM GrpmD2*-293
}
E X6# X6% GrpmD
D * +GRPM
E }
D2*30+GRPM GrpmD*-263
E X6# X6% }
D * -GRPM GrpmD
E X6# }
D GRPM GrpmD
E X6# }
D *1GRPM GrpmD
E X6# }
D *0GRPM GrpmD
E X6# } X6@]
D GRPM
E X6# X6^ X6^ }
L * * GRPM
upper lower
GrpmL
E }
L2*+60*-60GRPM
GrpmL2*60*–60
}
E X6# GrpmL
L GRPM
E X6# }
P GRPM GrpmP
E X6# }
O GRPM
X6#
GrpmO
DTP Crosspoint 84 IPCP Series Matrix Switchers • DSP SIS Commands
Additional description
X6# X6!]
Set the group fader to a value of
*
] Set the group 2 fader control to
-29.3 dB.
X6# X6$]
Increase the level of the
*
X6%
by dB.
] Raise the group 2 fader 3 dB (from
-29.3 dB to -26.3 dB, starting from
the level set in the
control
example, above.
X6# X6$] Decrease the level of the
*
X6%
fader by
X6# X6!] In verbose modes 1 and 2, the
*
response is simplified to
X6# ]
Mute all blocks in group
*1
X6# ]
*0 Umute all blocks in group
Set the groups soft limits to
X6# X6^ X6^]
* *
Set the upper soft limit for the group 2
]
fader to +6.0 dB and the lower limit to
-6.0 dB.
X6# X6^ X6^]
In verbose modes 0 and 1, the
* *
response is simplified to
X6# X6&]
* Show the group type (
X6# . In verbose modes 0 and 1, the
response is simplified to
Y6) is the control or mix-point. In
verbose modes 0 and 1, the response is
Y6) Y6) Y6) ]
* 1 * 2 *...* 16
simplified to
X6!
.
X6#
group fader
Set a group fader
X6# group
dB.
X6$] .
X6#
.
X6#
.
X6^ and X6^ .
X6^ X6^]
* .
X6&
) for group
X6&]
.
Y6) Y6) Y6) ]
* *...* .
1 2 16
28