Extron electronics DTP CrossPoint 84 IPCP Programming Manual page 11

Command and Response Table for Matrix Switcher Commands
Command Function
Create Ties
NOTES:
•
Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*03%02*03$4*4!.
•
The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.
•
The matrix switchers support 1- and 2-digit numeric entries (1*1 or 02*02).
Tie input video and audio to output
Example:
Tie input video only to output
Example:
Tie input audio only to output
Example:
Untie input video and audio
Quick multiple tie
Example:
Tie input to all outputs, video and
audio
Example:
NOTE: clears all ties.
0*!
Tie input to all outputs, video only
Example:
Tie input to all outputs, audio only
Read ties
Read video output tie
Read audio output tie
EDID commands
NOTES:
•
See table 1, on the next two pages for
•
Leading zeroes are optional for the entry of the inputs (
•
E X#
For the Save (
S EDID
Assign EDID data to an input
Example:
Assign EDID data to all inputs
View EDID input assignment
NOTE: The "EdidA" portion of the View command response appears only when the switcher is in Verbose mode 2 or 3 (see the
Verbose Mode SIS command on page 19).
Save output EDID to user assigned
slot
Example:
Import EDID to user slot
Export EDID
NOTE: X! = Input number
X@ = Output number
X# = EDID value (resolution and rate)
X$
= EDID filename
SIS Command
(Host to Unit)
X! X@
* !
1*3!
X! X@
* %
7*5%
X! X@
* $
8*4$
X@
0* !
E X! X@ X! X@ }
+Q * !... * $
E }
+Q3*4!3*3%3*2$
X!
*!
5*!
X!
*%
10*%
X!
*$
X@
%
X@
$
X#
values.
X!
s) and EDID values (
} E X# X$ }
) and Inport (
I , EDID
E X! X# }
A * EDID
E }
A7*36EDID
E X# }
A *EDID
E X! }
A EDID
E X# }
S EDID
E }
S133EDID
E X# X$ }
I , EDID
E X# X$ }
E , EDID
– ( = untied input)
00 08 00
– ( = untied output)
00 04 00
See table 1 on the next page.
nnnnn.bin. Can include a full path name. File carries 128 or 256 bytes of data.
DTP Crosspoint 84 IPCP Series Matrix Switchers • Programming Guide
Response Additional description
(Unit to Host)
X@ X! ]
Out Tie the input
•In •All
output
] Tie input 1 video and audio to output 3.
Out03•In01•All
X@ X! ]
Audio breakaway.
Out
•In •Vid
] Tie input 7 video to output 5.
Out05•In07•Vid
X@ X! ] Audio breakaway.
Out
•In •Aud
] Tie input 8 audio to output 4.
Out04•In08•Aud
X@ ] Untie the video and audio input from
Out
•In00•All
output
]
Qik
]
Tie input 3 video and audio to
Qik
output 4, tie input 3 video to output 3,
and tie input 3 audio to output 2.
X! ]
In
•All
] Tie input 5 video and audio to all outputs.
In05•All
X! ] Audio breakaway.
In •Vid
] Tie input 10 video to all outputs.
In10•Vid
X! ] Audio breakaway.
In
•Aud
X!]
Video input
X!]
Audio input
X#
s). Leading zeroes are reported in the response.
X#
) commands, is valid only in the range of
X! X#]
EdidA * Assign an EDID value of
] Assign an EDID value of 1280x720 at
EdidA07*036
60 Hz to input 7.
X#]
EdidA Assign an EDID value of
X#]
X#]
Save the output 1 EDID to location
EdidS
]
Save the output 1 EDID to user location 1.
EdidS133
X#]
EdidI
X#]
EdidE
X!
video and audio to
X@
.
X@ .
X! X@
is tied to output .
X! X@
is tied to output .
through .
75 82
X# X!
to input .
X#
to all inputs.
X#
.
9