Output - Extron electronics DXP DVI Pro User Manual

5.
NOTES:
Example 8: Muting and Unmuting an Output
In the following example, several switcher outputs are muted and unmuted. The steps
show the front panel indications that result from your action.
1.
Press the Esc button to clear all
ENTER
Figure 53.
2.
red.
3. To select both video and audio for viewing and muting, if necessary, press and release
NOTE:
Press the Video button to
toggle video on and off.
The button lights green
when selected.
Figure 54.
NOTE:
on and off.
without ties.
restored, the mute settings are retained.
selections.
C O N T R O L
VIEW ESC
PRESET
The button flashes once.
Clear All Selections
This example shows the front panel indications if examples 1, 2, and 3
have been completed.
I / O
VIDEO AUDIO
Until you select an input, the buttons for all untied
outputs light amber if no inputs are tied, green if
no video inputs are tied (only audio is tied), or
red if no audio inputs are tied (only video is tied).
INPUTS
1 2 3 4 5 6
Select Audio Only
Output mutes are protected when front panel lock mode 2 is selected.
from the front panel (see
(Executive Modes)" on page 37).
If front panel lock mode 2 is selected and you try to perform steps 4 and
5, the actions are ignored. Set the lock mode to 0 to enable changes.
Press the Audio button
to toggle audio on and
off.
The button lights red
when selected.
7 8
lock mode 2 but you cannot change them
"Locking and Unlocking the Front Panel
35