Extron electronics DTP CrossPoint 84 IPCP Programming Manual page 8

Command and Response Table for Matrix Switcher Commands
Symbol definitions
]
= Carriage return and line feed
}
= Carriage return (no line feed)
| = Pipe (can be used interchangeably with the
• = space
E
= Escape key
W = Can be used interchangeably with the
X!
= Input number
X@
= Output number
X#
= EDID value (resolution and rate)
X$
= EDID filename
X%
= Enable or available
X^
= Input audio source
X&
= Output audio source
X*
= Detected input audio format
X(
= HDCP authorized device
X1)
= HDCP output
X1!
= HDCP status (for inputs)
X1@
= HDCP status (for outputs)
X1#
= Video format
X1$
= Output video bit depth
X1%
= Video mute status
X1^
= Input signal status
X1&
= TP and insertion input number
X1*
= Switch position
X1(
= TP (scaled) and insertion output number
X2)
= Name
NOTE: The HTML language reserves certain characters for specific functions (see
X2!
= Lock mode
X2@
= Scaler preset
X2#
= Firmware version number to second decimal place (x.xx)
X2$
= Verbose firmware version-description-upload date/time (see the
X2%
= Voltage
X2^
= Internal temperature
X2&
= Fan speed
X2*
= Picture adjustments
}
character)
E
character
00 – 08 ( 00 = untied input, valid for tie commands only)
– ( = untied output, valid for tie commands only)
00 04 00
See table 1 on page 10.
Can include a full path name. File carries 128 or 256 bytes of data.
nnnnn.bin.
0 = Disable or not available
= Auto (see the example on
0
1 = HDMI (de-embedded digital audio) (default)
= Analog 2-channel audio
2
0 = Original HDMI audio
0 = None
1 = 2-channel
= Off
0
0 = Auto
= No source device connected
0
1 = Source connected is HDCP-compliant
= No monitor connected
0
1 = Monitor connected but does not support HDCP
2 = Monitor connected, supports HDCP, but the video signal is not encrypted
3 = Monitor connected, supports HDCP, and the video signal is encrypted
0 = Auto (HDMI RGB Full to CEA sink or DVI to non-CEA sink)
1 = DVI (RGB 444, no audio, no InfoFrames)
2 = HDMI RGB Full (RGB 444, 000 - 255 audio, InfoFrames)
3 = HDMI RGB Limited (RGB 444, 016 - 255 audio, InfoFrames)
4 = HDMI YUV Full (RGB 444, 000 - 255 audio, InfoFrames)
5 = HDMI YUV Limited (RGB 444, 016 - 255 audio, InfoFrames)
6 = HDMI YUV Full (RGB 422, 000 - 255 audio, InfoFrames)
7 = HDMI YUV Limited (RGB 422, 016 - 255 audio, InfoFrames)
0 = Auto (default)
= No mutes
0
= Video mute
1
= No signal detected
0
07 or 08
= DTP
0
03 or 04
12 characters maximum
upper- and lower-case alphanumeric characters and _ / and spaces are valid.
= Mode 0
0
–
001 128
Query firmware version (verbose)
Positive or negative voltage and magnitude
Degrees Celsius
RPM
000 through 127 (064 = default)
DTP Crosspoint 84 IPCP Series Matrix Switchers • Programming Guide
1 = Enable or available
page 11)
1 = Embed audio
= 3-channel or bitstream
2
= On (default)
1
1 = On (always encrypted)
= Source connected is not HDCP-compliant
2
1 = 8-bit
= Video and sync
2
= Sync detected
1
= HDBT (output only)
1
Special Characters
on page 20).
= Mode 1
1
command on page 14).
2 = None
= XTP
2
= Mode 2 (default)
2
6