Extron electronics DTP CrossPoint 84 IPCP Programming Manual page 16

Command and Response Table for Matrix Switcher Commands (continued)
Command Function
Information requests
Information request
Request part number
NOTE: There are up to three separate sets of Extron firmware on which the switcher can report: the controller firmware, which is the
overall control firmware; the Ethernet protocol firmware, which handles the Ethernet interface; and the latest optional Extron firmware
update, which is available at www.extron.com.
Query controller firmware version
Example:
Query controller firmware version
(verbose)
Response description: Ethernet protocol firmware version-controller firmware version-updated firmware version
Example:
1.23-1.00(1.06LX-DTPCP84 -Tue, 08 Apr 2014 00:00:00 UTC)-1.00*(1.06LX-DTPCP84 -Mon, 21 Apr 2014 16:39:21 UTC)
Ethernet protocol
firmware
Request system status
NOTE: The " " portion of the response appears only when the switcher is in Verbose mode 2 or 3.
Sts00*
Response description: Power supply
Example:
View and erase file directory
NOTE: The response to the View File Directory command differs, depending on whether the command is sent via an RS-232 or Telnet
connection or sent via a Web browser connection.
View file directory
RS-232 port and Telnet
View file directory
Web browser
Erase user-supplied web page/files
NOTE: X2# = Firmware version number to second decimal place ( x.xx )
X2$ = Verbose firmware version-description-upload date/time.
X2% = Voltage
X2^ = Internal temperature
X2&
= Fan speed
SIS Command
(Host to Unit)
I
N
Q
Q
0Q
0q
Description
DTP CrossPoint firmware version
S
Temperature Celsius Fan 1 RPM
• •
S
E }
DF
E }
DF
E }
filenameEF
Positive or negative voltage and magnitude
Degrees Celsius
RPM
DTP Crosspoint 84 IPCP Series Matrix Switchers • Programming Guide
Response Additional description
(Unit to Host)
]
DTPCP84
] See the Extron website for the part
-nnnn-nn
60
number.
X2#]
] The factory-installed controller firmware
1.23
version is 1.23 (sample value only).
X2# X2$ X2$] Detailed status of the controller firmware
- -
and any firmware upgrade. The active
firmware is marked by an asterisk (*).
A caret (^) indicates a bad checksum
or an invalid load. ?.?? indicates that
firmware is not loaded.
See below
* indicates the version running
X2% X2^ X2& X2&]
Sts00*
• • •
]
Fan 2 RPM
•
Temperature is 35.0 °C Fan 2 rotating at 2004 RPM
12.25•35.00•1976•2004
Power supply at 12.25V
See below: List user-supplied files.
filename1•date/time•length
filename2•date/time•length
• •
• •
filenamen•date/time•length
]]
# of•Bytes•Left
See below: List user-supplied files.
Var • file • = • new • array • ();
File • [1] • = • 'filename1,date1,filesize1';
• • •
File [2] = 'filename3,date3,filesize3';
• •
• •
File • [n] • = • 'filenamen,daten,filesizen';
File • [n+1] • = • # of • Bytes • Left
]
Del•filename
Upload date and time
Updated firmware version
]
]
]
14