Control Panel Keys And Indicators - Konica Minolta FAX 9840 Instruction Manual

Control Panel Keys and Indicators

1 LCD Panel: Refer to this display for instructions and information while the ma-
chine is performing operations, or when entering information or changing set-
tings.
2 Shift Up ( )Key: Use this key to move to the previously selected option in the
same operational layer when programming the machine, or to move to the upper
row from the lower row when data such as telephone numbers are listed in two
rows.
3 Shift Left ( ) Key: Use this key to return to previous operational layers in the
programming of the machine, as well as to move the cursor to the left during
normal operation.
4 Shift Down ( ) Key: Use this key to move to the next option in the same opera-
tional layer when programming the machine, or to move to the lower row from the
upper row when data such as telephone numbers are listed in two rows.
5 Shift Right ( ) Key: Use this key to move to the next operational layer in the
programming of the machine, determine/register a menu option or setting, or move
the cursor to the right during normal operation.
6 Alarm Indicator: This indicator light will flash and an alarm will sound to notify
of problems that occur. To turn off the alarm indicator, press the Stop key and
correct the problem.
7 Enter Key: Use this key to determine/register a menu option or setting, determine
the location of a broadcast operation, display the results of a transmission or print-
out a Message Confirmation Report when the machine is in the standby mode
with no document set in the document tray.
8 Help Key: Press this key to print out a function list.
9 Resolution Key (Photo, Ex. Fine, Fine, STD indicator lights): Use this key to
set the desired resolution of the fax/copy after loading the document. Use the
Photo setting when the original document includes half-tone images.
10 Type of Original Key (Dark, Normal, Light indicator lights): Use this key to
set the contrast after loading the document. Use Light for originals that are too
light, Normal for originals with good contrast, and Dark for originals that are too
dark.
11 Clear Key: Use this key to cancel ID, telephone number and programming en-
tries.
12 Menu/Exit: Use this key when the machine is in standby state to activate the
Menu mode. When Menu mode is activated, press this key to Exit the mode and
return to the standby state.
15