Signal Tones - Konica Minolta FAX 9840 Instruction Manual

Signal Tones

The Konica FAX9840 machines emit a number of sounds to inform the user of spe-
cific conditions.
Key Select Tone: This is a short beep that is emitted each time a key is pressed.
Error Tone: If an inappropriate key is pressed, the machine will emit three short
beeps. If there is a problem with operations during communications, the machine
will emit five long beeps. Press the Stop key to turn the error tone off, and then
print a Message Confirmation Report to check the source of the problem. To do
this, press the Copy key twice in succession with no documents loaded.
End of Session Tone: At the end of each successful faxing session, the machine
will emit a long beep to confirm that there were no errors or problems in the
communication.
Off-Hook Alarm Tone: If the machine is equipped with a telephone handset, and
if the receiver of the handset is left out of the cradle when not in use, the machine
will emit an intermittent warbling sound. To turn off the sound, return the receiver
to its cradle or press the Stop key.
19