Face Up Stacking / Face Down Stacking; Counters - Konica Minolta FAX 9840 Instruction Manual

Face up stacking / Face down stacking

Face up stacking / Face down stacking Face up stacking / Face down stacking
Face up stacking / Face down stacking Face up stacking / Face down stacking
The machine is capable of processing copies in two ways, stacked with printed side
face up or face down. The position of the lever located on the side of the machine,
above the power switch, determines how the copies are stacked.
1 In the upper position , copies will exit the machine face down.
2 In the lower position, copies will exit face up. However, use in the "face up"
position is only possible when copying or when using Network Print or PC
Print.
Tip:
1) Be sure to correctly set the lever position aligning FACE DOWN marking or FACE
UP marking position. Setting the lever at the half-way position will cause a paper
jam.
2) Do not change the lever position during printing operation.

Counters

A number of different counters are provided for keeping track of machine operations
and maintenance needs. Counters available for user viewing include the Print counter,
for tracking how many times recording paper has been printed, and the Scan counter,
for tracking how many times a document has been passed through the A.D.F. (Scan).
To Access Print/Scan Counters
1 Press Menu/Exit to enter Menu.
2 Press
3 Press
4 Press Enter to return to third operational layer.
5 Press Menu/Exit to return to standby mode.
60
to select Counter, press Enter or
or keys to select counter , press Enter or
.
.