Table of Contents
Advertisement
Printing Reports
After sending a fax, press Copy once (with no documents loaded) to see a report
confirming the transmission on the display of the control panel. To obtain a printout
of this report, press Copy one more time.
To Print Other Reports
1 Press Menu/Exit to enter Menu.
2 Press
3 Press
4 Print out all reports required, then press Menu/Exit to return to standby mode.
Codes Used in Reports
Result Codes
Result codes indicate the results of communications.
Code
Description
BUSY
The line of the remote location was busy or there was no answer.
CANCL
A confidential message was erased after being held in memory for 10
days.
COMP.
A multiple-location transmission was completed.
COVER
The machine's cover was opened during the communication.
NO
Transmission or reception failed due to a communications error.
OK
Transmission or reception was completed successfully.
PUNIT
There is a problem with the printing unit. Contact service representa-
tive.
R_JAM
A paper jam occurred while receiving a fax, when the machine was
unable to receive the entire message in memory.
S_JAM
A document jam occurred in the machine sending the fax.
STOP
Stop key was pressed, ending the session.
PAPER
Paper ran out during fax reception, and the machine was unable to
receive the entire message in memory.
92
to select Report Print, press Enter or
or
to select the report to be printed, press Enter or
.
.
Advertisement
Table of Contents
