IBM V7000 Introduction And Implementation Manual page 653

4. You are prompted for a name (for example, pubkey) and a location for the public key
(for example, C:\Support Utils\PuTTY). Click Save.
Ensure that you record the name and location, because the name and location of this SSH
public key must be specified later.
Public key extension: By default, the PuTTY key generator saves the public key with
no extension. Use the string "pub" for naming the public key, for example, "pubkey", to
easily differentiate the SSH public key from the SSH private key.
5. Click Save private key (Figure A-4).
Figure A-4 Save private key
6. You are prompted with a warning message (Figure A-5). Click Yes to save the private key
without a passphrase.
Figure A-5 Confirm the security warning
7. When prompted, enter a name (for example, "icat"), select a secure place as the location,
and click Save.
Key generator: The PuTTY key generator saves the private key with the PPK
extension.
8. Close the PuTTY key generator.
Appendix A. CLI setup and configuration
633