IBM V7000 Introduction And Implementation Manual page 380

To make the view more clear and structured, filters can be used to show only those storage
pools matching the conditions defined in the Filter field in the upper right of the window. In
Figure 8-61, we show how to filter on
the name
Figure 8-61 Filter the pools view
A few actions can be performed on storage pools using the Actions menu. A pool can be
renamed
When you expand a pool's entry by clicking the plus sign (+) to the left of the pool's icon, you
get access to the MDisks associated with this pool. You can perform all actions on them, as
described in 8.2, "Working with MDisks" on page 335.
Each defined storage pool is displayed along with its assigned icon and
graphical indicator showing that the ratio the pool's capacity is allocated to volumes. Also the
Mode
of the
and the
A red vertical bar inside the indicator determines the warning level at which a Storage pool
space warning will be posted in the system's event log. The default warning threshold is at
80% utilization.
360
IBM Flex System V7000 Storage Node Introduction and Implementation Guide
Internal
as part of the name.
icon
, its can be changed, and it can be deleted from here as well.
MDisk
, which external storage system it might belong to (if it does), the
Tier
is shown by default.
Name Internal
and showing us only MDisk Pools with
Name Status
, , and a
LUN ID