IBM V7000 Introduction And Implementation Manual page 314

3. Step 3 of the Storage Migration Wizard is to complete the mapping of external storage
LUNS (Figure 7-12). Make sure that you record the information mentioned in this step,
as you need it in a later step. Click Next.
SCSI ID: You might need to record the SCSI ID of the volume to which the host is
mapped. Some operating systems do not support changing the SCSI ID during
the migration.
Figure 7-12 Storage Migration Wizard step 3 - Map Storage
After you click Next, IBM Flex System V7000 Storage Node starts to discover external
devices (if you have correctly zoned the external storage systems with IBM Flex System
V7000 Storage Node and mapped the LUNs). When the discovery completes, IBM Flex
System V7000 Storage Node displays the MDisks discovered.
294
IBM Flex System V7000 Storage Node Introduction and Implementation Guide