Using Ibm Flex System V7000 Storage Node Management Gui For Troubleshooting; Tasks - IBM V7000 Introduction And Implementation Manual

5. Right-click a component to access an action pop-up window, as shown in Figure 13-30.
Figure 13-30 CMM Chassis Map - action pop-up window
13.8.2 Using IBM Flex System V7000 Storage Node management GUI for
troubleshooting tasks
Always use the recommended actions on the Events panel of the management GUI of the
Flex System V7000 Storage Node as the starting point to diagnose and resolve a problem.
Use the management GUI to run Fix Procedures. This topic explains how to run the
recommended action for any unfixed alert, and what to do if you cannot run the management
GUI, as shown in Figure 13-31.
For more details on using the IBM Flex System V7000 Storage Node management GUI for
troubleshooting tasks, see the following link:
http://publib.boulder.ibm.com/infocenter/flexsys/information/index.jsp?topic=%2Fco
m.ibm.acc.4939.doc%2Fsite_qicfgsys_FSM.html
Figure 13-31 Run Fix Procedures to resolve problems using the management GUI
606
IBM Flex System V7000 Storage Node Introduction and Implementation Guide