IBM V7000 Introduction And Implementation Manual page 337

More details include, for example, the drive's RPM speed or its MDisk member ID, and the
Part number of the disk if it should fail and require to be replaced. Part Identity, Technology
type, and Drive Class can be shown by right-clicking the blue header bar of the table
(Figure 8-4). Also, if you click the table headers, the table content can be ascending or
descending sorted by the value represented in that column.
Figure 8-4 Internal Storage window details selection
In addition, you can find the current internal storage capacity allocation indicator at the upper
right. The Total Capacity shows the overall capacity of the internal storage installed in IBM
MDisk Capacity
Flex System V7000 Storage Node. The shows the internal storage capacity
Spare Capacity
that has been assigned to the MDisks. The shows the internal storage
capacity used for hot spare disks. The percentage bar in Figure 8-4 indicates that 0%
capacity has been allocated; this is because no internal storage has been configured in this
example.
317
Chapter 8. Storage pools