IBM V7000 Introduction And Implementation Manual page 449

A window opens and asks if the volumes in the relationship are already synchronized. In most
situations, the data on the master volume and on the auxiliary volume are not identical, so
click No and click Next to enable an initial copy (Figure 9-86).
Figure 9-86 Activate initial data copy
If you select Yes, the volumes are already synchronized in this step, a warning message
opens (Figure 9-87). Make sure that the volumes are truly identical, and then click OK to
continue.
Figure 9-87 Warning message to make sure that the volumes are synchronized
You can choose to start the initial copying progress now, or wait to start it at a later time. In our
example, select Yes, start copying now and click Finish (Figure 9-88).
Figure 9-88 Choose if you want to start copying now or later
429
Chapter 9. IBM Flex System V7000 Storage Node Copy Services