IBM V7000 Introduction And Implementation Manual page 551

We then added a single device and then had a look at the properties of that device for each
iSCSI target. In Figure 12-30, the first target was highlighted and Devices box clicked.
Figure 12-30 Two 'Disk 1's identified on first target
From here, there are two disks of the same name identified as 'Target 0' and 'Target 1'. They
represent two paths, one from each x240 host adapter to the node canister on separate
networks.
From the other path, the iSCSI target of node 2 is shown in Figure 12-31.
Figure 12-31 Two more devices on second target
531
Chapter 12. Host configuration