Kyocera 7002i Operation Manual page 172

Preparation before Use > Registering Destinations in the Address Book
4
NOTE
• Refer to the following for details on entering characters.
Character Entry Method (page 11-9)
• Select [Connection Test] to check the connection to the server you chose. If the
connection fails, check the entries you made.
The Folder (FTP) Address
"Host Name", "Path", "Login User Name" and "Login Password" [Change] > Enter the
information > [OK]
The table below explains the items to be entered.
Item
*1
Host Name Host name or IP address of FTP server
*2
Path Path for the file to be stored
For example: User\ScanData
If no path is entered, the file is stored in the home
directory.
Login User Name FTP server login user name
Login Password FTP server login password
*1 You can also specify the port number. Enter the following format separated by a colon.
"Host name: port number" or "IP address: port number"
To enter the IPv6 address, enclose the address in brackets [ ].
(Example: [2001:db8:a0b:12f0::10]:21)
If the port number is not specified in [Host Name], the default port number is 21.
*2 When the FTP server is based on Linux/UNIX, the path including the sub-folder is
combined by the slash "/" not using the back-slash.
NOTE
• Refer to the following for details on entering characters.
Character Entry Method (page 11-9)
• Select [Connection Test] to check the connection to the FTP server you chose. If the
connection fails, check the entries you made.
Check if the destination entry is correct > [Save]
The destination is added to the Address Book.
To register the registered address in a one-touch key, select [Save] > [Yes]
NOTE
Refer to the following for registering the One Touch Key.
Adding a Destination on One Touch Key (One Touch Key) (page 3-32)
Descriptions
3-28
Max. No. of
Characters
Up to
70 characters
Up to
128 characters
Up to
64 characters
Up to
64 characters