Toner Container Replacement - Kyocera 7002i Operation Manual

Troubleshooting > Regular Maintenance

Toner Container Replacement

When toner is empty, the following message will be displayed.
"Toner is empty."
When toner runs low, the following message will be displayed. Make sure you have a new toner container available for
replacement.
"Toner is low. (Replace when empty.)"
NOTE
• For the toner container, always use a genuine toner container. Using a toner container that is not genuine may
cause image defects and product failure.
• The memory chip in the toner container of this product stores information necessary for improving customer
convenience, operation of the recycling system for used toner containers, and planning and development of new
products. The stored information does not include information that makes it possible to identify individuals, and is
only used anonymously for the above purposes.
CAUTION
Do not attempt to incinerate parts which contain toner. Dangerous sparks may cause burns.
1
2
Tilt the operation panel upwards and open the front cover.
Turn the toner container release lever to the vertical position.
10-4