Repeat Copy - Kyocera 7002i Operation Manual

Hide thumbs Also See for 7002i:

Table of Contents

Using Various Functions > Functions

Repeat Copy

Enables additional copies in the desired quantity as necessary after a copy job is completed.

For confidential documents, you can set up a password for the use of Repeat Copy. In such a case, the correct

password must be entered to perform Repeat Copy.

To register a password, select [# Keys] and enter a 4-digit password.

• A Repeat Copy job is cleared when the power switch is turned off.

• If you forget the password, Repeat Copy cannot be performed for that document. Make a note of the

password beforehand if necessary.

(Value: [Off] / [On])

Repeat Copy is not available when the machine is equipped with the optional Data Security Kit.

When the maximum number of Repeat Copy jobs to retain in the document box is set to 0 (zero), this function cannot be

Repeat Copy Job Retention (page 8-38)

You can select Repeat Copy as the default setting.

Repeat Copy (page 8-20)

Giving a file name to a copy job will facilitate identification of the data when copying.

File Name Entry (page 6-65)

The Repeat Copy jobs are stored in the Job Box. Refer to Outputting Repeat Copy Jobs to print out the Repeat Copy

Outputting Repeat Copy Jobs (page 5-62)