Configuring Job Accounting; Default Setting - Kyocera 7002i Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Configuring Job Accounting

Configuring Job Accounting

Default Setting

Select the default value for usage limit, and whether or not to enable counting by paper size.
1
2
Display the screen.
1
[System Menu/Counter] key > [User Login/Job Accounting]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Model Name
7002i
8002i
2
"Job Accounting Settings" [Next] > "Job Accounting (Local)" [Next] > "Default Setting"
[Next] > "Default Counter Limit" [Next]
Configure the settings.
1
Select [Change] for the item you want to modify and then select [+], [-] or use the numeric
keys to enter the default restriction on the number of sheets.
2
Select [OK].
Item
Counter Limit
[Individual] selected for Copy/Printer Count
Copy Restriction
(Total)
Print Restriction
(Total)
Scan Restriction
(Others)
FAX TX Restriction
Login User Name
7000
8000
When you add a new account, you can change the
default restrictions on the number of sheets used. You
can set any number from 1 to 9,999,999.
The items that can be set differ depending on whether
[Individual] or [Total] is selected for [Copy/Printer
Count].
Copy/Printer Count (page 9-51)
Sets the default restriction on the number of sheets used
for copying.
Sets the default restriction on the number of sheets used
for printing.
Sets the default restriction on the number of sheets used
for scanning (excludes copying).
*1
Sets the default restriction on the number of sheets used
for sending faxes.
9-44
Login Password
7000
8000
Description