Kyocera 7002i Operation Manual page 380

Setup and Registration (System Menu) > System Menu
Item
Special Paper Action
Separator Paper Source
Show Paper Setup
Message
Cassette 1 to 7
Multipurpose Tray
When printing on Prepunched, Preprint, and Letterhead, punch-holes might not be
aligned or the print direction might be upside-down depending on how originals are
set and the combination of copying functions. In such a case, select [Adjust Print
Direction] to adjust the print direction. When paper orientation is not important, select
[Speed Priority].
If [Adjust Print Direction] is selected, load paper according to the steps below.
Example: copying on Letterhead
Original Paper
Original Paper
Value: Adjust Print Direction, Speed Priority
Select the default paper source for separator sheets.
Value: Cassette 1 (to 7), Multipurpose Tray
NOTE
[Cassette 5] to [Cassette 7] are displayed when the following options are installed.
[Cassette 5]: When a Side Feeder (3,000-sheet), Side Feeder (500-sheet×3), or
Large Capacity Side Feeder (500, 1,500-sheet×2) is installed.
[Cassette 6]: When a Side Feeder (500-sheet×3), or Large Capacity Side Feeder
(500, 1,500-sheet×2) is installed.
[Cassette 7]: When a Side Feeder (500-sheet×3), or Large Capacity Side Feeder
(500, 1,500-sheet×2) is installed.
Set whether to display the confirmation screen for the paper setting when a new
paper is set for each cassette.
Value: Off, On
NOTE
[Cassette 5] to [Cassette 7] are displayed when the following options are installed.
[Cassette 5]: When a Side Feeder (3,000-sheet), Side Feeder (500-sheet×3), or
Large Capacity Side Feeder (500, 1,500-sheet×2) is installed.
[Cassette 6]: When a Side Feeder (500-sheet×3), or Large Capacity Side Feeder
(500, 1,500-sheet×2) is installed.
[Cassette 7]: When a Side Feeder (500-sheet×3), or Large Capacity Side Feeder
(500, 1,500-sheet×2) is installed.
8-14
Description
Finished Cassette
Finished Cassette
Multipurpose Tray
Multipurpose Tray