Kyocera 7002i Operation Manual page 522

Troubleshooting > Troubleshooting
Message
Memory is full.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time
elapses. For details on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-66)
N
Message
Non-genuine toner
installed.
P
Message
Paper jam.
Paper left.
Perform Tone Curve
Adjustment in the
System Menu.
Checkpoints
*1
—
—
Checkpoints
Is the installed toner container
our own brand?
Checkpoints
―
—
Over long periods of use, the
effects of the ambient
temperature and humidity can
cause output hues to vary
slightly.
Corrective Actions
The memory is full and the job
cannot be continued. Select
[Continue] to print the scanned
pages. The print job cannot be
processed completely. Select
[Cancel] to cancel the job.
The process cannot be
performed due to insufficient
memory. If only [End] is
available, select [End]. The job
will be canceled.
When insufficient memory
occurred frequently, contact
your dealer or service
representative.
Corrective Actions
We will not be liable for any
damage caused by the use of
third party supplies in this
machine.
Corrective Actions
If a paper jam occurs, the
machine will stop and the
location of the jam will be
indicated on the screen. Leave
the machine on and follow the
instructions to remove the
jammed paper.
Remove paper from the
document finisher.
Run [Tone Curve Adjustment].
10-30
Reference
Page
—
—
Reference
Page
—
Reference
Page
page 10-43
—
page 10-39