Staple/Punch - Kyocera 7002i Operation Manual

Using Various Functions > Functions

Staple/Punch

Org./Paper/
Copy
Finishing
Staple
NOTE
This function requires the optional Document Finisher. Note also that saddle stitching (center stapling) requires the
Folding Unit.
For details on paper sizes and numbers of sheets that can be stapled, refer to the following:
4,000-Sheet Finisher (page 11-25)
Folding Unit (For 4,000-Sheet Finisher) (page 11-26)
Staples the finished documents. The staple position can be selected.
Item
Staple Off
Top Left
Top Right
2 staples Left
2 staples Top
2 staples Right
Saddle Stitch
Original Top Edge on Top, Top Edge on Left,
Orientation Auto
Functions
Custom
Memory
Box
Value
USB
Functions
Select the staple position. For details on original
orientation and staple position, refer to the following:
Original Orientation and Punch Hole Position (page
6-29)
Select whether to fold the finished documents in two
with staples in the center.
When placing originals, be sure to place the cover page
at the bottom. For details on saddle stitching, refer to the
following:
Booklet (page 6-43)
Select the orientation of the original document top edge
to scan correct direction. Select [Original Orientation]
to choose orientation of the originals, either [Top Edge
on Top] or [Top Edge on Left]. Then select [OK].
6-26
Description