Kyocera 7002i Operation Manual page 409

Setup and Registration (System Menu) > System Menu
Item
Service Status
Optional Network Status
Admin Report Settings
[System Menu/Counter] key > [Report] > [Admin Report Settings]
Configure settings for Outgoing FAX report and Incoming FAX report.
FAX Operation Guide
Result Report Setting
[System Menu/Counter] key > [Report] > [Result Report Setting]
Item
Send Result Report
E-mail/Folder
*1
FAX
Canceled before
*2
Sending
Recipient Format
FAX RX Result Report
Job Finish Notice Setting
RX Result Report Type
*1 Displayed only when the optional FAX Kit is installed.
*2 When "E-mail/Folder" and "FAX" are set to [Off], this function will not be displayed.
*3 This is not displayed if you selected [Off] for FAX RX Result Report.
Prints the service status. More detailed information is available than on the Status
Page. Service personnel usually print the service status pages for maintenance
purpose.
Prints the optional network status, allowing you to check the information including
optional network interface firmware version, network address and protocol.
NOTE
This function is displayed when the optional Network Interface Kit or Wireless
Network Interface Kit is installed.
Automatically print a report of transmission result when a transmission is complete.
Automatically print a report of transmission result when E-mail or SMB/FTP
transmission is complete.
Value: Off, On, Error Only
FAX Operation Guide
Print a send result report if the job is canceled before being sent.
Value: Off, On
*2
Select the Recipient Format for the send result report.
Value: Name or Destination, Name and Destination
*1
FAX Operation Guide
*1
FAX Operation Guide
*1*3
FAX Operation Guide
Description
Description
8-43