Printing Document From Quick Copy Box; Deleting The Documents Stored In The Quick Copy Box - Kyocera 7002i Operation Manual

Printing from PC > Printing Data Saved in the Printer

Printing Document from Quick Copy Box

Quick Copy feature facilitates additional prints of a document already printed. Activating Quick Copy and printing a
document using the printer driver allow the print data to be stored in the Quick Copy Job Box. When additional copies
are required, you can reprint the required number of copies from the touch panel. By default, up to 32 documents can be
stored. When power is turned off, all stored jobs will be deleted.
NOTE
• When the number of jobs reaches the limit, the oldest job will be overwritten by the new one.
• To maintain free space on the box, you can set the maximum number of stored jobs.
Quick Copy Job Retention (page 8-38)
1
2

Deleting the Documents Stored in the Quick Copy Box

1
2
Display the screen.
1
[Home] key > [Job Box]
2
[Quick Copy/Proof and Hold] > [Open]
3
Select the creator of the document > [Open]
Print the document.
1
Select the document to print > [Print]
2
Specify the number of copies to print as desired.
3
Select [Start Print].
Printing starts.
Display the screen.
1
[Home] key > [Job Box]
2
[Quick Copy/Proof and Hold] > [Open]
3
Select the creator of the document > [Open]
Delete the document.
Select the document to delete >
The document is deleted.
Delete
[ ] > [Yes]
4-21