Kyocera 7002i Operation Manual page 415

Setup and Registration (System Menu) > System Menu
LAN Interface
Item
LAN Interface
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Wi-Fi Direct Settings
[System Menu/Counter] key > [System/Network] > [Network] > [Wi-Fi Direct Settings]
Set Wi-Fi Direct.
Item
Wi-Fi Direct
Device Name
IP Address
Auto Disconnect
Wi-Fi Settings
[System Menu/Counter] key > [System/Network] > [Network] > [Wi-Fi Settings]
Set Wi-Fi.
Wi-Fi
Item
Wi-Fi
Specify the settings for the LAN interface to be used.
Value: Auto, 10BASE-T Half, 10BASE-T Full, 100BASE-TX Half, 100BASE-TX Full,
1000BASE-T
Select whether to use Wi-Fi Direct.
Value: Off, On
Specify the device name.
NOTE
• Up to 32 characters can be entered.
• This function is displayed when [Wi-Fi Direct] is set to [On].
Check the IP address of the machine.
TCP/IP Setting (page 8-47)
NOTE
This function is displayed when [Wi-Fi Direct] is set to [On].
Automatically disconnect devices connected through Wi-Fi Direct.
Value: Off, On
NOTE
• If you select [ON], set the waiting time for automatic disconnection.
• This function is displayed when [Wi-Fi Direct] is set to [On].
Select whether to use Wi-Fi.
Value: Off, On
8-49
Description
Description
Description