Erase Shadowed Areas - Kyocera 7002i Operation Manual

Using Various Functions > Functions

Erase Shadowed Areas

Layout/Edit
Copy
When scanning with the document processor open, erase the extra shaded area.
(Value: [Off] / [On])
Page #
Layout/Edit
Copy
Adds page numbers to the finished documents.
The available formats for numbering are [-1-], [P.1] and [1/n]. The format [1/n] prints the total number of pages in the
place of "n".
Select the numbering format from [-1-], [P.1] or [1/n].
Item
Off
-1-, P.1, Position
1/n
1st Page
Start #
Advanced
Custom
Send
Setup
Functions
Custom
Box
Original
Value
Top Left, Top Middle,
Top Right, Bottom Left,
Bottom Middle,
Bottom Right, Detail
1 to 10
1 to 999
USB
Functions
Memory
Box
[-1-] [P.1]
Select the print position of page number.
Select [Detail] to specify the detailed page number
position using numeric values, and to set the page
number position ([Same as Front Page], [Mirror Front
Page]) when a page number is placed on the back side
of the paper in duplex printing.
To start page numbering from a page other than the first
page, select [+] or [-] in "1st Page" to specify the starting
page. Select [# Keys] to use the numeric keys for entry.
To start the numbering with a number other than 1,
select [+] or [-] in "Start Number" to specify the starting
number. Select [# Keys] to use the numeric keys for
entry.
6-51
Functions
[1/n]
Description